- Wolfson WM8740 DAC Chip + TI PCM2706
- USB signal input, provides I2S interface for decoding
- Works as a DAC+AMP Combo or a standalone AMP
- 2-Setting Gain Switch for impedance matching
- 470mAh rechargeable Li-polymer battery with integrated charging system
- Measures 51*21*82mm, and weighs only 108g
- Battery life is 38hours
- Comes with leather pouch, AC adapter, USB cable, warranty card, and owner's manual
- Dual Wolfson WM8740 DAC Chip + TI PCM2706
- USB signal input, provides I2S interface for decoding
- Works as a DAC+AMP Combo, a standalone AMP, or a standalone DAC (Line out function)
- 2-Setting Gain Switch for impedance matching
- OPAMP rollable
- AMP section can be powered by either USB or 9V battery
- Measures 55*21*92mm, and weighs 130g
- 9hours play time with 9V 300mAh battery (when powered by battery)
- Comes with extra enclosure (black color), leather pouch, USB cable, warranty card, and owner’s manual
- PCM2906, converts USB into a S/PDIF signal
- CS8416, DA-receiver chip
- WM8740, D/A chip
- OP+BUF structure for amplification. Default Opamps are AD8656 and Dummy Buffers.
- 2-Setting Gain Switch for impedance matching (+3/10dB)
- Dedicated MCU (Micro Controller Unit) to manager inputs, outputs, and functions.
- Flexible input and output compatibility. It has USB, optical, coaxial, stereo input, line out, and stereo output
- Works as a combo or a stand-alone AMP, DAC, USB soundcard
- Built-in rechargeable Li-polymer battery plays up to 30 hours (30 hrs for AMP, or 20hrs for combo)
- Measures 55*21*104mm, and weights 168g
- Comes with power adapter, leather pouch, optical cable, USB cable, and warranty card. (opamp rolling kit excluded
3ch Architecture Design
Two Gain switches
ALPS Potentiometer
Anodized Stainless Steel Case
Rechargeable Li-Polymer Battery with integrated charging system
Charging is accomplished with either the USB cable or AC adapter
Up to 38 hours of play time
Measures 64.5L x 37W x 10H (mm), and weighs only 28g
IBasso D6 Amp/DAC
Dual WM8740s High Performance D/A chip
- TI TAS1020B USB receiver chip, handles up to 24Bit/96KHz USB digital signal
- OP+BUF structure for amplification
- 2-Setting Gain Switch for impedance matching (+3/10dB)
- Works as a combo or a stand-alone AMP, DAC, USB soundcard
- Powered by 12.6V Li-polymer rechargeable battery pack, or USB power
- 20 hours play time with stock OPAMPs
- High output power, 650mW+650mW into 32Ω
- Measures 55*24*92mm, weights 150g
- Comes with charger, leather pouch, USB cable, 3.5 to 3.5 interconnect, rubber feet, and warranty card
iBasso Line Out Dock Adaptor in Black - featuring dock
connector to 3.5mm jack socket.
iBasso CB04 3.5mm Jack Cable - featuring flat silver
cabling.
iBasso CB06 3.5mm Copper Jack Cable - featuring
platted high purity copper cabling.
iBasso CB05 Line Out Dock Cable in Black - featuring
flat silver cabling.
iBasso CB07 Line Out Dock Copper Cable in Black -
featuring plaited high purity copper cabling.
IBasso D12 Headphone Amp/DAC
Dual WM8740 DAC section, and new amplification section that allows single OPAMPs. The D12 is a Self powered DAC and Hi-Definition headphone amplifier with many input options, which includes digital inputs from optical, coaxial, USB, and analog input from AUX IN/OUT. It not only works as DAC/AMP combo, but also works as a stand-alone AMP, DAC, or USB soundcard. Also, the D12 has a new anodised finish and split case, which is convenient for OPAMP rolling.
IBasso PB2 Balanced Headphone amplifier
- 32V voltage swing, the highest voltage swing among portable Amplifiers
- Up to 2500mW output power
- Balanced and Single End inputs and Balanced and Single End outputs
- 3-Setting gain jumper for impedance matching
- 10 DIP sockets for OPAMP and Buffer rolling
- 4-layer gold plated PCB
- Rechargeable battery pack
- More than 20 hours play time with stock OPAMPs
- ALPS quad potentiometer, Hirose connector, Switchcraft jack, and Vishay high grade capacitors
IBasso DB2 balanced DAC
Takes USB input (up to 24Bit/96kHz), optical and coaxial inputs (up to 24Bit/192kHz)
- -110dB SN and -101dB Crosstalk
- Separated battery power supplies for analog section and digital section
- Low pass filter rollable.
- 4-layer gold plated PCB, with high grade components
- Provide Balanced and Unbalanced (3.5mm) line out
- Up to 13.5hours play time- Measures 55*24*100mm, and weighs 171g
iBasso T3 Headphone Amplifier (Digital) -. Featuring digital rocker volume
control, built-in lithium polymer battery and 2x
130mW/channel headphone output.
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out